КL80 in a case

On order
Wholesale only
Specify the price

Description

Accumulators and batteries alkaline nickel-cadmium open prismatic KL series

For power supply of low-voltage equipment of electric trains, trams, trolleybuses and subway cars.

Legend:

K – open nickel-cadmium prismatic batteries;

L – discharge mode (long-term);

55, 70, 80, 125 – nominal capacities (C5), A.h .;

Р – battery in a plastic tank;

T – the location of the terminals on the front side;

And – the battery in a rubber case;

numbers in front of letters – the number of batteries connected in series in the battery.

Climatic version U category 3 in accordance with GOST 15150-69, for operation at ambient temperatures from minus 400C to plus 400C.

Design

The battery is a block of electrodes, consisting of positive and negative lamella electrodes, separated from each other by a plastic frame separator. The block of electrodes is placed in a metal (KL-70P-U3 – in a plastic) rectangular tank and insulated from it with vinyl plastic spacers. The battery cover is welded to the tank around the perimeter. On the walls of the tank there are ribs (except for KL-70P-U3) in the form of corrugations, which increase the rigidity of the battery tank. On the end walls of the tank there are two trunnions (except for KL-70P-U3), with the help of which the batteries are fixed in the battery frame through insulating bushings.

KL125 batteries are manufactured in metal (both with pins and rubber covers) or in plastic tanks.

The down conductor is carried out with the help of bores, which are brought to the battery cover.

As an electrolyte in batteries, a solution of caustic potassium with a density of 1.19-1.21 g / cm3 with the addition of (20 + 1) g / l of lithium hydroxide is used. The accumulators are equipped with a plug with a sleeve. The plug sleeve is triggered at an overpressure inside the accumulator from 0.005 to 0.05 MPa (from 0.05 to 0.5 kgf / cm2).

When the battery is tilted at an angle of 45 ° from the normal position (leads up), the electrolyte does not pour out or splash during operation.

Accumulator batteries consist of four, five or nine (9KL-70P-U3) accumulators connected in series in an electric circuit using steel nickel-plated jumpers. The batteries are supplied in metal frames.

Accumulators (batteries) are efficient at ambient temperatures from minus 40 to plus 40C.

Batteries are supplied to the consumer shaped, without electrolyte, in a discharged state (for 9KL-70P-U3 batteries, it is possible to supply filled and charged versions).

The operating time of the batteries is at least 1000 cycles (with a capacity of at least 0.6C5 A.h.).

The capacity of batteries after 28 days of storage in a charged state under normal climatic conditions of the environment is not less than 0.5C5 A.h.

Capacity of batteries charged at constant voltage:

– at 25 ° C with voltage (1.59-1.61) V – not less than 0.7C5Ah .;

– at 0 ° C with voltage (1.65-1.67) V – not less than 0.5C5Ah;

– at minus (18 ± 2) ° C with voltage (1.73-1.76) V – not less than 0.4C5Ah.

Capacity of batteries discharged at low ambient temperature:

– at minus (18 ± 2) ° C – not less than 0.5C5Ah;

– at minus (40 ± 2) ° C – not less than 0.2C5A × h.

Rechargeable batteries and batteries are resistant to ambient relative humidity of 98% at 25 ° C, vibration loads and single shocks.

Specifications

Table 1

Item type Regulatory and technical document Nominal capacity,
A.ch.
Rated voltage, V * Overall dimensions, mm, length, L

width, B

height, H

Weight, kg, no more

no electrolyte

with electrolyte
КL55 05743834-3482-005- 01 TU

 

55 1,2 47х129х353 3,8/5,0
L55 6,0 319х170х392 21,6/27,6
КL80 80 1,2 47х129х353 4,3/5,7
L80 4,8 264х170х392 20,0/25,5
L80 6,0 319х170х392 24,1/31,1
КL80 in a case 1,2 55х137х357 4,7/6,1
КL125 (with trunnions) 125 1,2 68х129х353 5,8/7,5
КL125 (in a case) 1,2 74х137х362 6,5/8,0
КL125Р 1,2 74х137х353 5,9/7,4
L125 4,8 375х170х392 26,5/33,5
L125И 4,8 305х169х408 26,4/32,4
L125Р 4,8 305х169х408 28,8/34,8
L125 6,0 458х170х392 32,6/40,7
5KL125И 6,0 379х169х408 35,8/43,3
L125Р 6,0 379х169х408 32,8/40,3
L125Т 6,0 489х166х392 32,6/41,1
КL70Р-У3 ZhUIK.563336.025 ТУ 70 1,2 61х136х271 3,4/4,2
L70Р-У3 10,6 190х444х276 31,6/39,8

* Battery voltages are indicated taking into account no more than 2% losses on buses and jumpers.

Table 2

Product name Charge mode Discharge mode Maximum current when starting the engine, A Number of starts Capacity after 28 days of storage in a charged state, A.h. Working range of temperatures, degrees (0С) warranty period of operation, years warranty period of storage, years
Current, A Duration, h Current, A Duration, h End voltage, V from to
KL55 11 8 11 5 1,0  –  – 27,5 minus 40 plus 40 3 3,5
KL80 16 8 16 5 1,0  –  – 40
KL80 (in bag) 16 8 16 5 1,0  –  – 40
KL125 25 8 25 5 1,0  –  – 62,5
KL125 (in bag) 25 8 25 5 1,0  –  – 62,5
KL125P 25 8 25 5 1,0  –  – 62,5
4KL80 16 8 16 5 4,0  –  – 40
5KL80 16 8 16 5 5,0  –  – 40
5KL55 11 8 11 5 5,0  –  – 27,5
4KL125 25 8 25 5 4,0  –  – 62,5
4KL125И 25 8 25 5 4,0  –  – 62,5
4KL125P 25 8 25 5 4,0  –  – 62,5
5KL125 25 8 25 5 5,0  –  – 62,5
5KL125И 25 8 25 5 5,0  –  – 62,5
5KL125P 25 8 25 5 5,0  –  – 62,5
5KL125Т 25 8 25 5 5,0  –  – 62,5
KL70P-У3 14 8 7 10 1,0 220 10 35 2,5
9KL70P-У3 14 8 7 10 9,0 220 10 35